1. Click "Start Menu" then select "Run"
2. Type "ncpa.cpl" then click "ok"
3. Right Click "LAN or High-Speed Internet" then click "Properties"
4. Select "Internet Protocol (TCP/IP)" then click "Properties"
5. Select "Use the following IP address". Type in...
1. Take the "power cord" from the back of the POE device and unplug it for 10 secs.
2. Plug back in the "power cord"
If you have any questions regarding the contents of this guide please click here to contact unWired Broadband Technical Support.
Products Affected
Mac OS X 10.8
1. Click the "Apple" Logo located in the upper left corner of the screen and then select "System Preferences...".
2. Under the Internet & Network category open the "Network".
3. Select the Network Device "Ethernet". In the...
1. Click "Start Menu" then click "Search programs and files"
2. Type "ncpa.cpl" then press "Enter"
3. Open "LAN or High-Speed Internet"
4. Click "Properties" tab.
4. Select "Internet Protocol (TCP/IP)" then click "Properties"
5. Type in "IP address" and...
1. Turn off your computer. When it has shut down completely, proceed to the next step.
2. If you have a router, remove the power cable. Wait thirty seconds.
3. Plug your router back in.
4. Turn your computer back on. When it is completely powered up, you should have your...
